How To Fix A Broken Necklace?


How To Fix A Broken Necklace
10 comments have been left on this guide! Click to read.35 people have marked this guide “completed.” Will you be next? 12 people have favorited (and subscribed to) this guide. Will you be next? 5 minutes Rough estimate of how long this takes. (Use this to plan your day, not to feel judged.) Very easy Difficulty rating: Very easy! No disassembly required.

    • Examine the break.
    • If there is an open link in the chain, skip to step three.
    • Use the needle nosed pliers to separate the closure of a link on one side of the break.
    • You do not need this step if your necklace already has an open link.
    • Hook the closed link opposite the break to the open link.
    • Using the needle nosed pliers, squeeze the ends of the open link together.
    • Make sure the closed link is inside the open link.
    • Using the needle nosed pliers, squeeze the closure so that the ends of the link are flush with one another.
    • Test the closure by gently pulling it from either side. If it comes apart repeat steps 4 and 5.

Almost done! Now you’re ready to flaunt your old necklace once again! Conclusion Now you’re ready to flaunt your old necklace once again!

Can a broken necklace chain be fixed?

Link, cable and box chains, commonly worn solo or with a pendant, are the least difficult to fix. If a link breaks, you may be able to reattach it yourself. However, hollow/rope, herringbone and wheat chains are trickier and may require soldering.

Can you glue a necklace back together?

Breaking your jewellery is never a fun experience, especially if it was expensive or held sentimental value. However, it is possible to repair broken jewellery from home using a simple superglue method. This is definitely the most cost effective option as seeing a professional jeweller to fix it can come with a steep price tag.

Thankfully, all you need to repair jewellery is a trusted bottle of Superfast Plus (along with the broken pieces!) So, collect the pieces of the broken necklace, bracelet or earrings etc. and take a few minutes to sort out where you think each piece will go. If you want to make sure you are doing it right, take a place mat and set each broken piece down to have a better look.

Think of it is as a jigsaw puzzle. Every piece has its place and it’s up to you to find it. Once you have a better idea about how to fit the broken pieces of your jewellery together, you’re ready to tackle the problem.

Can you fix a necklace that broke in half?

4 Different Types of Difficult Chains To Repair Not all jewelry is created equaland not all jewelry is repaired equally either! If you have a broken necklace or bracelet in need of chain repair, you might be experiencing mixed results with some jewelers in getting it fixed.

  • Worse yet, they might be turning you down- but why? Read on to learn more about why your jeweler is saying no to chain repair.
  • How are Chains Repaired? Chains are usually pretty easy to fix, if they’re within a standard thickness around 1.4mm.
  • Depending on the, the jeweler can cut a link open at one of the two broken ends, thread it through another link, and fuse the gap shut with solder, an easily melted metal alloy that functions like a glue.

Other types of chains aren’t as straightforward, however. For instance, it’s hard to repair a rope chain and maintain its original integrity due to the way it’s constructed; the area of work will have a visible difference in comparison to the rest of the chain.

Certain chains will never look the same even after repair. Here are a few scenarios as to why a jeweler might turn a chain repair down: 1. The chain is hollow Rope chains are notorious for this construction: the design of the chain is empty on the inside of the links. This is to reduce metal weight and make the piece cheaper for sale.

While it means you can buy the chain for a lower price, it also means that the item will be “crushed” at the spot where the jeweler works on it. In addition, the repair is not strong and may not withstand daily wear over time. As a result, some jewelers will turn the item down to avoid any potential issues with their customers. How To Fix A Broken Necklace This rope chain was fixed by weaving one single link through the area of repair.2. The chain’s design can’t be fixed Herringbone chains and other custom designed chains are almost done for if they are broken. Because these chains are constructed via a series of fluid, interlocking flat links, if the chain is snagged it “unravels” the entire structure. How To Fix A Broken Necklace This herringbone chain was snagged and torn. Our jeweler “unfolded” the links to the best of his ability.3. The metal is strange If your chain is made from an unconventional such as brass, bronze, or copper, the jewelers may not take a chance on it. This is especially common if your chain has other components on it such as stones, charms, and pendants.

  • Unknown metals can react very strangely to heat, and the soldering process requires exposure to a laser or a flame.
  • When the metal heats up, it could potentially melt or burn, causing damage to the chain and anything attached to it.
  • Additionally, the area of repair won’t match the rest of the chain.
  • Most jewelers do not have base metal solder, so they will default to using silver solder.

This disrupts the overall color of the chain. At Quick Jewelry Repairs, to avoid these issues, we test the chain with a little heat first. If it reacts badly, we will inform the customer that we cannot perform the repair. If it seems to take heat well, we’ll remove any components from the chain that may burn in the repair process as an extra precaution before we proceed. How To Fix A Broken Necklace This brass chain had a lot of plastic beads and stones. Our jeweler added links in a similar metal and minimized the amount of soldering needed.4. The chain is plated Some chains are plated with gold or rhodium in order to give it a certain color. The repair work removes that plating, exposing the original color of the metal underneath.

As some jewelers may not have the ability to gold plate the chain, they will turn it down to avoid any issues with their customers. An additional factor is the original metal of the chain. If the chain is sterling silver plated with gold, most jewelers should be able to re-plate that. Strange metals, however, cannot be plated easily and if the jeweler determines that it’s not readily conducive to the, they will not take the job.

Our jewelers can work with atypical jewelry metals that need plating. We do this by nickel plating the chain to make it chemically compatible with the gold plating process, and then we proceed to place it in our gold-plating tank for the final coloration. How To Fix A Broken Necklace This citrine pendant was gold-plated to restore its original color. Now you’re up to date on reasons why your jeweler won’t perform the chain repair! If you’re experiencing this issue, hit us up in the comments below and we can help you out. : 4 Different Types of Difficult Chains To Repair

You might be interested:  How Long Does It Take For A Battery To Kill A Dog?

Why do necklace chains break?

Abrasives and Corrosives Weaken Chains – Lotions, cosmetics, shampoos, and more. The chemicals in household items that are common in our everyday lives can be hazardous to your favorite jewelry. Liquid and gel residues can build up on your pieces and make them hard to clean. You wash your clothing after wearing it, why not wash your jewelry too! A few drops of Dawn dishwashing liquid with hot water in a teacup is the perfect overnight soak. Rinse it off in the morning and dry with a soft cloth. This one action will prevent contact dermatitis too! ~ Nanz Aalund Bainbridge Artisan Resource Network What to look for: Chain links that are visibly worn through and thinner in places show signs of wear from chemicals or abrasives

Can you superglue gold?

Getting to know metal glues – Got something metal that needs fixing but not sure where to start? Choose the best glue for metal with our guide to the different types of metal glue. When it comes to fixing metal, there are three types of metal glue to keep an eye out for: epoxies, polyurethanes and super glues.

  1. Epoxy adhesives form the strongest metal-to-metal bonds.
  2. They consist of two parts – the adhesive and the hardener.
  3. These combine to create strong, long-lasting bonds between different types of metal or between metal and concrete surfaces.
  4. For metal you may want to find yourself a two-part epoxy adhesive.

These dry quickly, some within five minutes and are ideal for quick DIY jobs that require permanent bonding. You can also use these epoxy glues to repair and fill gaps in most types of metal and stone. Polyurethanes are another common type of glue that can be used on metal.

You can normally identify polyurethanes because of their water-resistant and UV-resistant qualities. These are another great option because they dry quickly without becoming brittle. These single-part glues need moisture to set but are waterproof once cured. Another benefit to using polyurethanes is that once they’ve dried completely, they can be sanded, stained, and painted.

Since it doesn’t shrink, they can withstand extreme temperatures and can be painted over, this glue is great for DIY jobs like fixing your oven door, saucepan handles and radiators. You may be wondering, “Does super glue work on metal?” It most certainly does.

  1. Super glues are based on ethyl cyanoacrylate.
  2. These single-part glues are great for creating fast, strong bonds between metal surfaces.
  3. Super glues can stick surfaces together almost instantly, which makes them great for almost all metal-to-metal applications, but they can’t fill in gaps.
  4. For fast and strong results, use Loctite’s 60 Second All-Purpose glue,

This versatile and reliable super glue dries transparently and forms long-lasting invisible bonds between metals in just a few seconds. It’s extra strong which means it can be used for all types of home repairs involving metal, even everyday tasks like reattaching saucepan handles or fixing your bike.

Can I super glue my necklace?

Don’t Use Superglue! – Superglue may be the first glue to come to mind for your jewellery making needs, but it’s not suitable as it doesn’t fill gaps and becomes brittle, resulting in your jewellery pieces coming apart. Instead, we recommend using Devcon 5 Minute Epoxy Glue which is fast drying, high strength and creates high quality bonds. Available as a syringe or tubes.

What glue holds jewelry together?

Devcon 5 Minute Epoxy Glue This is our most popular and reliable glue for jewellery making, available as a duo syringe or tubes. Simply mix equal amounts of resin and hardener to use within 5 minutes.

What glue to fix a necklace?

Epoxy Resin – Epoxy Resin is a heavy-duty option when it comes to jewelry. Great glue for securing beads to metal or for bonding gemstones. The resin also dries clear and that makes it excellent for creating jewelry. The epoxy resin can also be used to cast smaller parts or even to create whole jewelry pieces.

Is a broken chain fixable?

Can a Broken Gold Rope Chain Be Fixed? – Yes, it can be repaired. However, a golden rope chain belongs to the types of chains that aren’t as straightforward in repairing. It’s hard to maintain its original integrity because of the way it is constructed once it is broken.

Can I sell my broken necklace?

Why You Might Consider Selling Broken Jewelry – If you are considering selling your broken jewelry, you no doubt have a good reason. Whether the piece is irreparably damaged and you’re seeking to sell it for scrap or your broken piece holds no sentimental value, and you’d prefer to sell it and apply the proceeds to something new, you’ll have plenty of options to explore.

Start With an Appraisal Before you begin exploring avenues to sell your broken jewelry, you should have it appraised. A professional appraisal will provide you with a better sense of the piece’s intrinsic value which can help you decide how best to proceed. Remember that while you may have an emotional value attached to the piece, buyers will not.

With a professional appraisal, you can better assess the item’s real value and determine the most appropriate buyers for your article. It may also help inform your decision to sell your jewelry entirely. If you learn your broken jewelry won’t return much cash value to you, you might consider other options, such as modifying or repurposing it. How To Fix A Broken Necklace If you’re selling your broken jewelry because you want to liquidate some of your jewelry investments or because you don’t particularly care for it, you may find that repairing the piece before selling it is the more profitable approach. If you are selling directly to a buyer, jeweler, or pawnbroker, the price you can ask for a broken piece will be significantly lower than the price of a wearable item.

You should discuss the cost to repair with your jeweler; if the jewelry repairs are relatively inexpensive compared to the increase in the piece’s value, you might consider fixing your broken jewelry before selling it. A thorough cleaning will also help make your item more appealing to potential buyers, regardless of whether you decide to repair the piece or sell it as-is.

Selling Broken Jewelry Directly to a Buyer Online marketplaces offer many options for selling your jewelry. Whether you list your item yourself on a public auction site or place an ad seeking a direct buyer will depend on your preference. If your jewelry is of high value, you may not be comfortable placing an advertisement on Facebook Marketplace or Craigslist, which may require an in-person meeting to complete the sale.

Online auction sites, such as eBay, allow you to complete your transaction online; however, you will incur fees for the site and many of the possible payment methods. Pros of Selling Directly to a Buyer Selling your jewelry directly to individual increases the odds that they are looking to purchase the piece for themselves rather than to turn a profit.

Since they won’t be thinking about their profit margin, you may have the opportunity to sell it for closer to its appraised value. Making it easy for your buyer will also increase these odds. If you have an appraisal as well as an estimate on the needed repairs, the individual buying the piece can better assess the total investment and the overall value they’ll receive for it.

  1. Cons of Selling Directly to a Buyer Even with an appraisal, selling directly to a consumer makes it necessary to educate potential buyers.
  2. While you have done your research and know what your piece is worth, your potential buyers may not recognize the value in your piece, and you may have to wade through low offers before you find one or two shoppers who have also done their homework on your jewelry’s worth.

If you need to sell the piece quickly, this may not be a welcome delay. Selling Broken Jewelry to or on Auction Websites How To Fix A Broken Necklace Unlike selling directly to a buyer, selling online to a website is a more faceless transaction. These are good options when you have some leftover items that you don’t really mind how much you get for them. However, these transactions are not going to get the same type of price that you would with any other type of scenario.

  1. Pros of Selling to an Online Jewelry Buying Website The biggest reason so many people sell broken jewelry to online websites is the ease of the transaction.
  2. You go to their website, fill out a form, and get an idea of what you will be paid.
  3. Many require photographs of the items and expect you to send them out within a short window.
You might be interested:  How To Get Daily Wire On Smart Tv?

Another pro of selling here is the array of items these websites will take. While buyers typically want jewelry with or without gemstones in it, you can sell anything with precious metal to these websites. So, if you have broken watches, old gems that fell out of other pieces of jewelry, and even some dental gold, you are still in luck.

  • Cons of Selling to an Online Jewelry Buying Website The biggest con to using any of these jewelry buying websites is that you are going to get the least amount possible for your jewelry.
  • If the jewelry is in wearable condition, you will get more than if you are selling broken jewelry, but the price will be as little as the company can get away with for the items.

Selling Broken Jewelry to a pawnbroker If the delays of selling to buyers directly don’t appeal to you, you may consider pawnbrokers as your next option. While you can likely sell your item quickly with this choice, it may come with sacrifices in other areas.

  1. Pros of Selling to a pawnbroker If you desire a quick turnaround, a pawnbroker will be among your fastest options.
  2. Typically, you can expect to sell your item immediately if your piece can be repaired and resold.
  3. You can also expect to be paid in cash so the full amount of the sale will be immediately available to you.

Cons of Selling to a pawnbroker How To Fix A Broken Necklace Even with an intact piece of jewelry, a pawnbroker is going to reduce the price they offer you by the investment they’ll be making in time and energy to sell your article to a new buyer. You’re also unlikely to fetch a similar price from a pawnbroker as you would directly from a buyer, so while this approach may offer the benefit of quick payment, but that payment will be less than you could likely receive if time were not a concern for you.

  1. Selling Broken Jewelry for Scrap You’ve no doubt seen advertisements for companies offering to pay cash for your gold jewelry,
  2. For irreparable jewelry, these scrap buyers may be a viable option.
  3. While you’ll be selling your items only for the value of its parts, some scrap metal buyers pay top dollar for those parts.

If there are gemstones in a piece that you plan to sell to a scrap buyer, you might consider having your jeweler remove any stones first so that you can sell them separately. Pros of Selling Broken Jewelry for Scrap When your jewelry is damaged beyond repair, scrap buyers offer an option to recoup at least part of your investment.

  • All of these buyers are not created equal, however.
  • It’s important to research each company you’re considering to ensure they have a good reputation and a track record for paying a fair price to past customers.
  • You should also learn the value of your items so you can ensure you’re getting the best price.

While you can calculate the cost of your scrap gold before you seek out buyers, you should know that the spot value may change from day to day, and you will only receive a percentage of the calculated value from even the most reputable of buyers. Cons of Selling Broken Jewelry for Scrap While selling your metals for scrap may offer a reasonable price with minimal invested time, selling loose gemstones is not quite as simple.

  • If your broken piece has large diamonds or colored gemstones, you may want to have these removed for repurposing into a new piece of jewelry before you seek out a scrap buyer for your metal materials.
  • Selling Broken Jewelry to a Jeweler If your goal in selling your broken jewelry is to recoup your costs which you’ll put toward the purchase of new jewelry, you may want to talk with your jeweler about your options.

Not all jewelers buy jewelry, whether it be damaged or in like-new condition. If your jeweler is skilled at custom jewelry design and completes jewelry repair on-site, they may be interested in the broken jewelry you’re looking to sell. Pros If you’re ultimately looking to invest in a new piece of jewelry after selling off the broken items, your jeweler should be your first stop.

They may be willing to offer you credit against your new purchase in exchange for your damaged items. You may also be able to repurpose much of your damaged item for use in a new, custom piece your jeweler can create for you. Cons If you’re selling your broken jewelry without the intent to replace it with something new, this option may not be ideal for you.

If your jeweler offers credit for broken jewelry, this won’t provide you with the cash on hand that is available when you sell to a pawnbroker, for example. Additionally, not all jewelers purchase broken jewelry. If you’re unsure of your jeweler’s policies, you may save yourself a trip by calling before you drop by.

  • Strategy for Buying Broken Jewelry There are many reasons to consider buying broken jewelry instead of selling it.
  • Jewelry is a great option if you want to hold on to an investment.
  • Precious metals appreciate in value, as do nearly all gemstones.
  • Even if the jewelry is broken, the components are still valuable.

You can look in any of the above-mentioned places for broken jewelry. One of the easiest places to look will be in local pawn shops. They buy the jewelry at low prices, and while they still want to make a profit, the prices are still much lower than most individuals or jewelry stores.

Plus, most jewelry stores will repair the items before selling them, so finding any is incredibly rare. The best way to make money off of broken jewelry is to work with a local jeweler who can take any broken jewelry you buy and fix it. That way, whenever you find a good deal on new jewelry, you can bring it to them for repairs.

Then, you can either hold on to the items or you can resell them for a profit and use those profits to buy more. One of the best long-term investments is precious metals, especially gold. It has increased in value steadily for the last several hundred years.

By buying broken jewelry and holding on to it, you have the best chance of being able to make enough money to make the venture worth it. Quick Tips for Buying Jewelry If you want to get started with buying broken jewelry, you have a few options. You can look at local pawn shops or you can talk to a trusted jeweler first.

Once you figure out where to buy and who will repair your items, start tracking everything. You want to track all details of your transactions, including:

Location of purchase What was bought Price paid for the items Appraised value of items Repaired or not Sold price

You will need those for taxes, but you also want to track where you get the best deals from. Remember, investing in jewelry is a great option, but only if you can make the most out of each dollar you spend. Talk to a Professional If you’re considering selling a piece of damaged jewelry, you should reach out to your trusted family jeweler to discuss your options before making any decisions.

They can help you with the appraisal of the piece and also discuss the costs to repair or re-purpose it, and may potentially be willing to buy it from you directly, saving you quite a bit of the legwork involved with your other options. For jewelry repair and custom jewelry design in San Francisco, you’re always welcome to stop by our Union Street showroom,

Whether you’ve been our customer for decades or haven’t yet visited our shop, a member of our friendly staff will be happy to offer you their professional opinion and help you understand all your options. Call or stop by today and let us make selling or re-purposing your broken jewelry easy for you.

You might be interested:  How Much Does Peak Performance Cost?

How much does it cost to fix a popped necklace?

Repair or Replace a Necklace Chain: $30-$230 – If the chain on your favorite necklace breaks, don’t despair. Instead of replacing it outright, you can likely fix it by getting it soldered back together. Necklace chain repair will cost you anywhere from $30 to $230 depending on the type of metal and the area of the chain that needs to be soldered.

Can you fix a broken silver necklace?

Ruler Bent-nosed pliers Needle-nosed pliers Jump ring Butane torch Silver solder Flux Paintbrush Pickle

How To Fix A Broken Necklace Silver reflects light beautifully and flatters virtually any skin tone. Image Credit: humonia/iStock/Getty Images Silver is a popular precious metal that is used for many purposes, including the creation of jewelry. A silver chain, whether worn as a necklace or a bracelet, is a classic and enchanting adornment.

Is it OK to sleep in a chain necklace?

If You Never Want to Take Your Jewelry Off If’s that you, it’s OK! Sleeping with your jewelry on certainly isn’t the worst thing you can do. Jewelry can withstand normal wear and tear, and the chances of damaging it while you sleep are relatively minimal.

Is it OK to never take off a necklace?

‘You can potentially damage your jewelry by constantly wearing it, but there are no major health risks to wearing jewelry every day, which includes sleeping and showering,’ she says (unless you’re wearing costume jewelry, but we’ll get to that later).

Is it OK to wear cheap chains?

No, especially if they contain such metals as aluminum, lead, or cadmium. Most likely lead which can lead to neurological disorders like Alzheimer’s, fatigue, nausea, abnormal heart rhythm, and even cancer. I suggest to be very careful wearing fake jewelry.

Does jewelry glue work?

Jewelry Glue Jewelry glue is strong, permanent adhesive for holding jewelry and metal pieces together. and glues for metal – like Aleene’s Jewelry & and Aleene’s Jewel-It Embellishing Glue – dry clear and work on porous and semi-porous stones, gems, metals and other materials.


How To Fix A Broken Necklace : Jewelry Glue

Which glue is the strongest?

The Adhesive – The name of the world’s strongest adhesive is DELO MONOPOX. This is a modified version of the high-temperature-resistant DELO MONOPOX HT2860. This epoxy resin forms a very dense network during heat curing. A special filler was used among other things to modify the resin properties in order to achieve the extreme strength required for the world record.

Does hot glue work on metal?

What type of glue can be used to bond metal? – Methacrylate: Commonly referred to as an, this glue is a great option for bonding metals because it requires very little, if any surface preparation. You won’t have to worry about bonding to dirty, coated or other un-prepped surfaces.

Super Glue: Super glue can be a successful choice for bonding metals, provided the two surfaces fit together well. The bond line will need to be tight for the glue to do a good job. Super glue works best when there will be a low impact on the bonded surface after curing. So, it’s best not to use it for any parts that are exposed to excessive pressure, like metal joins or clasps.

Super glue can set in seconds, so you’ll need to work quickly. Prepare the surface and make sure you know how to match the pieces up swiftly and accurately before you apply the glue. Hot glue (glue guns): A is only an option when only one of the surfaces is metal.

It will also need to be a light metal. Don’t use a glue gun when the glue will be exposed to elevated temperatures after curing. Hot glue is manufactured to react with heat. Polyurethane: Polyurethane adhesive is an excellent option for metal bonding. It is a multipurpose adhesive that doesn’t need to be mixed or measured before using.

If you’re using polyurethane, we recommend you use a clamp to keep both surfaces steady and secure while the glue dries. The bond will be tough and strong after six to eight hours of curing. Epoxy : Epoxy glue is another good choice for bonding metals. How To Fix A Broken Necklace

How much does it cost to fix a broken necklace chain?

Repair or Replace a Necklace Chain: $30-$230 – If the chain on your favorite necklace breaks, don’t despair. Instead of replacing it outright, you can likely fix it by getting it soldered back together. Necklace chain repair will cost you anywhere from $30 to $230 depending on the type of metal and the area of the chain that needs to be soldered.

How long does it take to fix a broken necklace chain?

How Long Does Jewelry Repair Take? – Reis-Nichols Jewelers When a piece of your most beloved jewelry breaks, you want to have it repaired immediately. What most people don’t understand is that is a complex process that takes time if you want it done right. How To Fix A Broken Necklace By working with an experienced jeweler like Reis-Nichols, you can rest easy knowing your jewelry repair is in expert hands. Unlike other jewelry stores that provide a generic time frame in which your jewelry will be repaired, Reis-Nichols jewelers are candid about the process and are happy to address any questions or concerns you may have.

  • Jewelry Repair Process How long it takes to repair your jewelry will depend on what you need done.
  • If you just need a piece of jewelry or polished, it can take as little as one day.
  • In fact, Reis-Nichols may be able to perform a standard cleaning while you wait.
  • If you need a ring re-sized, a broken chain soldered, or a clasp replaced, you can expect a longer turn-around time of between seven and 10 days, on average.

Beware of jewelers that claim they can repair your jewelry in just a few minutes or hours. Jewelry repair requires great attention to detail and should never be rushed. Professional Jewelry Repair Reis-Nichols offers a wide range of jewelry repair services, such as cleaning and inspection, polishing, engraving, ring sizing, plating, and repair or replacement of pendants, chains, clasps, earring backs, prongs, and more.

If you need your jewelry returned to you quickly for a special event or any other reason, talk to a sales associate about rush service. On most occasions, your jewelry will be returned to you repaired in just a few short days. For more information about professional jewelry repair, your jewelry repair experts at Reis-Nichols in Indianapolis or Greenwood.

: How Long Does Jewelry Repair Take? – Reis-Nichols Jewelers

Can a jeweler fix a broken pendant?

3.Repair the damage – Now for the most important part of the process: repairing the damage! Since there are so many different things a jeweler will do in order to fix a pendant, here’s the breakdown: How To Fix A Broken Necklace This key pendant’s original bail had completely snapped off, requiring a replacement.

Broken bail: This repair depends on the level of damage to a bail. It may be open or squashed; in cases where the bail has thinned out or is wrenched open, the jeweler will apply solder. Solder is a metal alloy that is easy to heat up, allowing to act as a glue for other metal components. If the bail is squashed, the jeweler can either attempt to reshape it, or replace it entirely with a brand new one. Loose or missing stones: Loose stones are tightened accordingly- the jeweler places the item in a clamp and uses his hand tools to ensure that the settings are secure around the gem. If necessary, he may have to rebuild any prongs or settings if they are too worn down or entirely missing. Missing stones are replaced by a lapidary, who measures the correct size for the setting. Once the stone is ready, the jeweler sets it into the empty setting. General design repair: Sometimes the pendant just comes in with a flaw or a bit of damage here and there. Chances are, the jeweler will have to apply solder to it, or use pliers to bend and restore any structural damage.